I came up with this when I was working on restoring the exterior of a home in Newton, more specifically the front door and the garage door. The sconces around the doors were original to the home, which was built in the 1940’s, so they were a bit worn out and on the smaller side. I held onto them for quite some time before I knew what I wanted to do. It wasn’t until I was dismantling the actual light socket and the fixture was standing upright that I thought this could make a unique planter for an indoor house plant or succulent.
The reason I decided to share this idea with you is because the sconces and flush-mount seen here are quite common, and almost always thrown out when replaced. There really isn’t much need for old fixtures that are somewhat blah, but when turned into planters, boring outdated fixtures are now a conversation piece.
This project is simple, your materials are inexpensive and you just need a few things besides some elbow grease.
Match the grade of the steel wool with how much you’d like the fixture to look worn – the higher the grade, the more course it is. I went with grade 0 to lightly buff off some of the paint and reveal the metal underneath.
For any areas that are extremely rusty.
Find the right size for your fixture, preferably one WITHOUT drainage – assume your fixture is not waterproof. Water plants sparingly that do not have a drainage hole. I recommend a succulent, they do not need a great amount of water.
PAINT REMOVER (OPTIONAL)
The copper fixture needed remover, once I started scrubbing with the steel wool and realized there was copper under the black paint I wanted to reveal more of the copper finish.
Use these for the base of the fixture, since you’ve flipped the fixture upside down, most likely it will now have sharp edges.
Only one pane of glass was put back into the planter on the left because the succulent chosen will eventually grow and wrap around the sides.
I chose to fill the copper planter with rocks for a nice contrast with the copper and to cover the terracotta pots inside.